Skip to product information
Capacitive Soil Moisture Sensor V2.0
4.190 Ft
Taxes included.
Pickup currently not available
Corrosion-resistant capacitive soil probe with Gravity 3-pin interface. V2.0 fixes the old pain points (drift, noise sensitivity, connector quirks) for steadier, repeatable readings. Plug, read analog voltage, map to moisture—done.
Highlights
-
Capacitive sensing → no exposed metal, far less corrosion
-
Works at 3.3–5 V (RP2040, ESP32, Arduino, etc.)
-
Analog output (voltage increases with moisture)
-
V2.0 improvements: better stability & noise immunity, cleaner baseline, sturdier build/connector
Specs
| Property | Value |
|---|---|
| Interface | Gravity 3-pin: AOUT, VCC, GND |
| Supply | 3.3–5 V DC |
| Output | Analog voltage, proportional to moisture |
| Current Draw | Low (single-digit mA typical) |
| Sensor Type | Capacitive (corrosion-resistant PCB) |
| Compatibility | Arduino, ESP32/C3/S3, RP2040/Pico, STM32, etc. |
Pinout
| Pin | Function |
|---|---|
| AOUT | Analog output to MCU ADC |
| VCC | 3.3–5 V |
| GND | Ground |
What’s in the Pack
-
1× Gravity Capacitive Soil Moisture Sensor V2.0
-
1× Gravity 3-pin cable